How To: Change Rear Brake Pads On Harley-Davidson Sportsters

If you’re searching for the How To: Change Rear Brake Pads On Harley-Davidson Sportsters video, then you’re in the right place. Here’s why – because in this step by step guide, you’ll learn secret tips from the best professional mechanics who know how to turn wrenches…


How To: Change Rear Brake Pads On Harley-Davidson Sportsters

Check out this amazing video about the best How To: Change Rear Brake Pads On Harley-Davidson Sportsters


How To: Change Rear Brake Pads On Harley-Davidson Sportsters
Are your brake pads on your Harley-Davidson Sportster on their last centimeter of life? Are you lost when it comes to changing them out? Don’t worry, Todd is here for you. Watch as he walks you through how easy it is to change out those old wore out brake pads with a new set in this short how to tech tip.

00:01 – Intro
00:26 – Compress the pistons in the caliper explanation.
01:12 – Clean of the caliper and brake pad area with brake clean and some air.
01:58 – Use a pri-bar or putty knife to compress the brake caliper pistons.
03:12 – Remove the two pins holding the brake pads in.
04:32 – Remove the pads if they haven’t already fallen out of the caliper.
04:43 – Note the orientation in which the brake pads go with the new ones, see the difference between the inside and outside pads.
05:20 – Clean the 2 pins off.
05:38 – Apply pin lube to the 2 pins.
06:15 – Install the new pads.
08:53 – Install the 2 pins into the caliper and torque to factory spec.
09:33 – Review
10:28 – Pump those brakes
10:37 – Check the brake fluid level. Don’t mix Dot 3,4, or 5 always use same fluid.
12:31 – Brake pad change complete now GO FOR A RIDE!

Music by:
“Travel In Your Mind”
Composed by: Loyalty Freak Music

If you found this guide helpful, please share the How To: Change Rear Brake Pads On Harley-Davidson Sportsters video on Pinterest…