Keep Your Harley Davidson Road King Running Smoothly with this DIY Primary Oil Change Guide
If you’re the proud owner of a Harley Davidson Road King, you know regular maintenance is essential to keep your bike running smoothly. Changing the primary oil is a crucial part of this maintenance, but it can be intimidating for DIY mechanics. However, with our step-by-step guide, you can confidently change the primary oil on your Harley Davidson Road King in no time.
Follow our steps and perform a primary oil change on your Harley Davidson Road King.
Quick Summary:
In this guide, we’ll walk you through everything you need to know to change the primary oil on your Harley Davidson Road King.
We’ve got you covered, from the tools you’ll need to a detailed step-by-step process.
Safety Precautions:
Before changing the primary oil on your Harley Davidson Road King, it is crucial to take some safety precautions. Make sure you have the right tools, wear protective gear, and follow these tips:
– Make sure the bike is on a level surface
– Allow the bike to cool down before starting
– Use caution when removing the drain plug and oil filter
Helpful Tips:
Before diving into the guide, here are some helpful tips to keep in mind:
1. Always use the recommended oil for your Harley Davidson Road King.
2. Ensure all the necessary tools before starting the process.
3. Take your time and follow each step carefully to ensure a successful oil change.
4. Dispose of the used oil responsibly.
5. Check your owner’s manual for recommended intervals for primary oil changes.
Gather Your Tools
To change the primary oil on your Harley Davidson Road King, you’ll need the following tools:
– A drain pan
– A socket wrench
– A torque wrench
– A new oil filter
– Primary oil
– A funnel
– A clean rag
Once you have all the necessary tools, you’re ready to get started.
Follow These Easy Steps to Change the Primary Oil
Drain the Old Oil
To begin, warm up your bike for a few minutes to make the oil easier to drain. Then, place the drain pan under the primary oil drain plug and use your socket wrench to remove the plug. Allow the old oil to drain completely into the pan.
Next, remove the oil filter using your socket wrench and dispose of it properly.
Install the New Oil Filter
Before installing the new oil filter, lubricate the gasket with a small amount of new oil. Then, install the new filter and tighten it by hand until it’s snug.
Add New Oil
Slowly add the recommended amount of new primary oil using your funnel to the primary oil reservoir. Make sure to check your owner’s manual for the recommended amount.
Once you’ve added the new oil, replace the drain plug and tighten it to the recommended torque using your torque wrench.
Check the Oil Level
After you’ve completed the oil change, start your bike and let it run for a few minutes. Then, check the oil level and add more oil if necessary.
Parts:
In case you need any parts or tools mentioned in this guide.
- Fits: Harley Davidson All Twin Cam Motorcycles (Electra Glide/Ultra, Street Glide, Road King, Softail, Dyna FLH/FLT/FXD/FXST/FLST) 2000-2015
- The V-Twin Complete Engine Oil Change Kit includes 4 Quarts of Maxima V-Twin Full Synthetic 20w50 Engine Oil, 1 Quart (32 oz.) Maxima V-Twin Primary Oil, 1 Quart Maxima V-Twin 85w140 Transmission Oil, and a Black HiFloFiltro HF171BRC Premium Oil Filter
- Maxima V-Twin Full Synthetic is an ester based full synthetic motorcycle oil engineered to lower operating temperatures, reduce wear, increase film strength and offer extended protection
- Maxima V-Twin Heavy-Duty Transmission & Gear Oil is a high-quality, mineral based motorcycle gear oil, the Primary Fluid is a high-quality, mineral based motorcycle gear oil formulated for high-performance transmissions and primary chaincases
- Hiflofiltro RC Oil Filters are made using the worlds highest quality materials, with test results proving a 28% longer service life than OE and competitor brands, and feature a 17mm cross drilled nut for easy installation, removal, and lock wiring
- Longer oil life
- Meets or exceeds: API SG/SF/CC/CD, JASO MA and JASO MA-2, ACEA A3
- Lower oil temperatures
- Less noise, fewer leaks
- Product Type:Auto Accessory
- Item Package Dimension:7.625 " L X8.125 " W X9.625 " H
- Item Package Weight:11.0 Lbs
- Country Of Origin: China
Conclusion:
Changing the primary oil on your Harley Davidson Road King is essential to keeping your bike running smoothly. With our step-by-step guide, you can confidently perform this maintenance task independently. Always use the recommended oil and follow each step carefully for the best results.
Explore more tips, guides, and videos about DIY Harley Davidson repairs…
FAQs:
1. How often should I change the primary oil on my Harley Davidson Road King?
A: It’s recommended to change the primary oil every 5,000 miles or once a year, whichever comes first.
2. What type of oil should I use for my Harley Davidson Road King?
A: Always use the oil recommended by the manufacturer. Check your owner’s manual for the right type and amount of oil.
3. Can I change the primary oil on my Harley Davidson Road King without a lift or jack?
A: It’s possible, but using a lift or jack to raise the bike off the ground is much easier and safer.
4. How do I dispose of the used oil?
A: Check with your local recycling center or auto parts store for proper disposal methods.
5. Why is it important to check the oil level regularly?
A: Checking the oil level regularly can help prevent engine damage and prolong the life of your bike.
Disclaimer:
Performing maintenance on your motorcycle can be dangerous. Always exercise caution and follow safety guidelines when working on your bike. If you’re unsure about any process step, consult a professional mechanic.
*Options last updated on 2024-12-06 at 12:45.